See All Categories

Learn More

공지사항

검색
Current Page
  1. Home
  2. Forum
  3. Production

Production

Production

Forum Details
Title Head joint making details - completion of silver tube
Posted by Song Flute (ip:)
  • Rate 0points  
  • Date 2024-03-26 10:49:29
  • Recommend Recommend
  • Views 117


1. Insert the acid-treated tube into the mandrel so that it has an even circular shape as a whole

Pat lightly with a rubber hammer or wood hammer to spread.




2. Remove the silver lead that has been thickly mounted on the surface of the tube by stringing.

If the silver lead remains thick, in the process of straightening the tube

The surface cries heavily or causes severe curvature inside the tube.







3. Put it back on the mandrel and straighten it with a metal rod. 



4. Repeat by warming up from time to time. 



5. Repeat until the tube has a certain size of taper

This work has the same effect as forging and rolling.



 

6. When the necessary dimensions are reached,

 line (in the order of yellow wood, medium wood, detail, and driftwood)
Grind the surface thoroughly and use sandpaper to sand the inside 

and outside of the tube Grind evenly.


 

7. This tube is made so that the inner diameter matches the shape of the mandrel
Press using a press machine or a drawing machine.





8. Finish with fine sandpaper and cut both sides.




Report post

Report reason

Your report will thoroughly be reviewed by our team and we will then proceed according to our store policies.

Attachment
Password Please enter password to remove or edit this post.
Edit Comment

Password :

/ byte

Password : Submit Cancel

Add Comment
Add a commentName : Password : View Reply

Combination in 10-16 characters containing at least two of the followings: upper and lower case letters/numbers/special letters

/ byte

Enter without any spaces. (Case sensitive)

Comments can be added by Administrator only.

WORLD SHIPPING

PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :

GO
close